TP-Link EAP235-Wall Wireless Access Point AC1200 Wall

Technical Specifications TP-Link EAP235-Wall AC1200 Wireless Access Point Wall:

• Brand: TP-LINK
• Model: EAP235-Wall
• Hardware:
  • physical security lock
  • Antenna:
    • 2 dual antennas
      • 2.4GHz: 2x4dBi
      • 5GHz: 2x4dBi
  • Hardware Watchdog: Yes
• Wireless connections:
  • Wireless Standards: IEEE 802.11a/b/g/n/ac
  • Frequency: 2.4GHz and 5GHz
  • Signal rate:
  • 5 GHz: up to 867 Mbps
  • 2.4GHz: up to 300Mbps
  • EC transmission power:
    • <20dBm (2.4GHz)
• Wireless features:
  • 16 SSIDs（Up to 8 SSIDs on each band）
  • Turn on/off WiFi radio
  • Automatic channel assignment
  • Transmit power control (adjust in dBm)
  • QoS (WMM)
  • MU-MIMO
  • band steering
  • Beamforming
  • load balancing
  • speed limiter
  • schedule reboot
  • Schedule wireless transmission
  • WiFi stats based on SSID/AP/Client
• Wireless security:
  • Captive portal authentication
  • Access control
  • Wireless MAC address filtering
  • Wireless isolation between clients
  • VLAN mapping by SSID
  • Local LAN port based on VLAN
  • Unwanted AP detection
  • 802.1X support
  • 64/128/152 bit WEP, WPA/WPA2-PSK, WPA/WPA2-Enterprise
• Transmission power:
  • ≤20 dBm (2.4 GHz, EIRP)
  • ≤23 dBm (5 GHz, EIRP)
• Management:
  • Omada cloud access
  • omada app
  • Omada Cloud Controller
  • Centralized management:
    • Omada Hardware Controller (OC300)
    • Omada hardware controller (OC200)
    • Omada Software Controller
  • Omada Controller software
  • Cloud access Yes (via OC300, OC200 or Omada Software Controller)
  • EAPSi Driver Software
  • email alerts
  • ON/OFF control LED
  • MAC access management control
  • SNMPv1, v2c
  • Local System Registry Access / Remote Local System Registry / Remote Syslog
  • SSHSi
  • WebHTTP/HTTPS based management
  • L3Si Management
  • Multiple site management
  • management VLAN
• Interface:
  • Upload: 1 Ethernet port 10/100 Mbps
  • Down: 3 x 10/100Mbps Ethernet ports (one port supports up to 13W PoE power output. This feature requires the EAP to be powered by 802.3at (PoE+).
• Buttons:
  • reset
• Mounting: wall plate
• Power:
  • 802.3af/on PoE power supply
  • Power consumption: 9.8 watts / 24.4 watts (PoE output included)
• Dimensions: 143 x 86 x 20 mm

Box contents:

• 1 x TP-Link EAP235-Wall Wireless Access Point AC1200 Wall
• 1 x Installation Guide
• 1 x fixing screw